Removal Procedure

2007 Pontiac Torrent AWDSECTION Removal Procedure
    Fig 1: View Of EGR Valve & Pipe
    GM1087633Courtesy of GENERAL MOTORS CORP.
  1. Remove the exhaust gas recirculation (EGR) pipe (4). Refer to Exhaust Gas Recirculation Pipe ReplacementΒ .
  2. Disconnect the EGR valve electrical connector.
  3. Remove the EGR valve bolts (2).
  4. Remove the EGR valve (1).
  5. Remove the EGR valve gasket.
  6. Clean the EGR valve mating surface.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.