Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Enable/Disable RVS
To disable the remote vehicle start (RVS) function, perform the following steps:
- Turn ON the ignition, with the engine OFF.
- Access the Remote Start personalization features within the driver information center (DIC).
- Enable or disable the Remote Start feature.
The current state of RVS can be viewed through the DIC display under the Remote Start the display will read either ON or OFF.
When valet mode is enabled by pressing the valet switch (if equipped), RVS operation will be disabled.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.