SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2007SOLSTICE BASE, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMENGINE CONTROLS & FUEL - 2.4L - DIAGNOSIS & TROUBLESHOOTINGFUEL TANK LEAK TESTSYSTEM TESTING
2007 Pontiac Solstice Base, Standard

System Testing

2007 Pontiac Solstice Base, StandardSECTION System Testing
  1. Remove the fuel pump module access cover.
    2. IMPORTANT: If the floating indicator registers any flow after stabilizing, a leak is evident.
  2. Ignition OFF, install the J 41413-200  (J 41413-100) and the GE-41415-50  . Test for a fuel leak while the system is under pressure referring to the J 41413-210 Operation Manual.
  3. Using the J 41413-200  (J 41413-100) and the J 41413-210 Operation Manual, introduce smoke into the evaporative emission (EVAP) system. Inspect for leaks in any of the following locations:
    • The fuel tank, the fill limiter vent valve, the pressure relief valve, and the grade vent valve
    • The fuel pump module housing, the fuel pump module seal, the fuel pipe, and the EVAP pipes
    • The fuel tank pressure (FTP) sensor seal
    • The fuel fill pipe and hose
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.