SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2007SOLSTICE BASE, STANDARDREPAIR AND DIAGNOSISELECTRICALBODY ELECTRICALOEM CONNECTOR END VIEWSDATA COMMUNICATION CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) CONNECTOR END VIEW C3
2007 Pontiac Solstice Base, Standard

Body Control Module (BCM) Connector End View C3

2007 Pontiac Solstice Base, StandardSECTION Body Control Module (BCM) Connector End View C3
Fig 1: BCM C3 Connector End View
GM1814460Courtesy of GENERAL MOTORS CORP.
BCM C3 Connector Part Information

Connector Part Information 
  • OEM: 15492675
  • Service: See Catalog
  • Description: 41-Way F Metri-Pack 280 800 Series (RD)
Terminal Part Information 
  • Pins: A1, A3, A4, A5, A7, A8, A9, A10, A12, B1, D4, B3, B5, C12, D7
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: Pins A1, A3, A4, A5, A7, A9, A10, A12, B1, B12, D4 - E/A
  • Core/Insulation Crimp: Pins B3, B5, C12, D7 - E/C
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: C5, D1, D5, D6, D10, D12, D11
  • Terminal/Tray: 12110842/4
  • Core/Insulation Crimp: Pins C5, D1, D5, D6, D10, D12 - F/G
  • Core/Insulation Crimp: Pins D11 - A/B
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
BCM C3 Connector Terminal Identification

Pin Wire Color Circuit No. Function
A1 TN 294 Door Lock Actuator Unlock Control (AU3)
A2 - - Not Used
A3 D-BU/WH 149 Courtesy Lamp Supply Voltage
A4 GY 295 Door Lock Actuator Lock Control (AU3)
A5 GY 295 Door Lock Actuator Lock Control (AU3)
A6 - - Not Used
A7 BN 9 Park Lamp Supply Voltage
A8 PK 339 Ignition 1 Voltage
A9 YE 18 Left Rear Stop/Turn Lamp Supply Voltage
A10 GY 157 Courtesy Lamp Control
A11 - - Not Used
A12 D-GN 19 Right Rear Stop/Turn Lamp Supply Voltage
B1 TN 694 Driver Door Lock Actuator Unlock Control (AU3)
B2 - - Not Used
B3 RD/WH 1240 Battery Positive Voltage
B4 - - Not Used
B5 BN 4 Accessory Voltage
B6-B7 - - Not Available
B8-B11 - - Not Used
B12 GY 8 Instrument Panel Lamp Supply Voltage
C1-C2 - - Not Available
C3-C4 - - Not Used
C5 D-GN 801 RAP Fuse Supply Voltage
C6-C7 - - Not Available
C8-C11 - - Not Used
C12 OG 228 Windshield Washer Pump Control
D1 RD/BK 142 Battery Positive Voltage
D2-D3 - - Not Used
D4 RD/WH 840 Battery Positive Voltage
D5 D-GN 801 Retained Accessory Power Fuse Supply Voltage (AU3)
D6 PK 739 Ignition 1 Voltage
D7 PK 1339 Ignition 1 Voltage
D8-D9 - - Not Used
D10 RD/BK 442 Battery Positive Voltage
D11 RD/WH 640 Battery Positive Voltage (UQ3)
D12 RD/BK 242 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.