Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2007SOLSTICE BASE, STANDARDREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSCELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDIGITAL RADIO RECEIVER SETUPRECEIVER SETUP
2007 Pontiac Solstice Base, Standard
Receiver Setup
2007 Pontiac Solstice Base, StandardSECTION Receiver Setup
IMPORTANT:
The digital radio receiver setup option does not contain a submenu. Digital radio receiver setup will configure the following systems:
- DTCs
- GMLAN and class 2 radio messages
To setup the digital radio receiver, complete the setup procedure under the Special Functions menu of the scan tool, then cycle ignition.
IMPORTANT:
After replacement of an XM receiver, call XM radio to deactivate the receiver that has been removed from the vehicle.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.