Removal Procedure

2006 Pontiac Grand Prix GTSECTION Removal Procedure
    Fig 1: Hinged Side & Rear Seat Cushion Retainer
    GM1230608Courtesy of GENERAL MOTORS CORP.
  1. Remove the seat cushion. Refer to Seat Cushion Replacement - RearΒ .
  2. Using a flat-bladed tool, pry the hinged side apart to release the retainer from the seat frame.
  3. Remove the cushion retainer from the seat frame.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.