Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISSTEERINGPOWER STEERINGPOWER STEERING SYSTEMREPAIR INSTRUCTIONSPOWER STEERING PRESSURE PIPE/HOSE REPLACEMENTINSTALLATION PROCEDURE

2006 Pontiac G6 GTP, 2D Coupe, Standard

Installation Procedure

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Installation Procedure

Fig 1: Identifying Steering Gear Oil Seal Installer End Of J 44586

GM1492057

Courtesy of GENERAL MOTORS CORP.

Install the NEW power steering gear oil seal (1) to the power steering gear using the seal installation end of the J 44586 (2). See Special Tools .

Fig 2: View Of Power Steering Gear Oil Seals

GM1492058

Courtesy of GENERAL MOTORS CORP.

Ensure the power steering gear oil seals (1) are fully seated in the power steering gear.

Fig 3: View Of Power Steering Return Hose & Pressure Pipe/Hose

GM441201

Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.