Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 982 (ANTILOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM CONNECTORSELECTRONIC BRAKE CONTROL MODULE (EBCM)
2006 Pontiac G6 GTP, 2D Coupe, Standard
Electronic Brake Control Module (EBCM)
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Electronic Brake Control Module (EBCM)
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
Connector Part Information
|
Terminal Part Information
|
Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | BK/WH | 251 | Ground |
| 2-4 | - | - | Not Used |
| 5 | D-GN/WH | 2087 | 5-Volt Reference (JL4) |
| 6 | - | - | Not Used |
| 7 | L-BU | 910 | Yaw Rate Sensor Signal (JL4) |
| 8-10 | - | - | Not Used |
| 11 | L-BU | 1122 | Class 2 Serial Data |
| 12 | OG | 885 | Left Rear Wheel Speed Sensor Low Reference |
| 13 | TN | 884 | Left Rear Wheel Speed Sensor Signal |
| 14-15 | - | - | Not Used |
| 16 | PK | 1039 | Ignition 1 Voltage |
| 17 | - | - | Not Used |
| 18 | TN/BK | 464 | Delivered Torque Signal |
| 19 | D-GN | 2087 | 5-Volt Reference (JL4) |
| 20-22 | - | - | Not Used |
| 23 | L-GN | 1338 | Lateral Accelerometer Signal (JL4) |
| 24 | TN | 833 | Right Front Wheel Speed Sensor Low Reference |
| 25-26 | - | - | Not Used |
| 27 | L-BU | 830 | Left Front Wheel Speed Sensor Signal |
| 28 | YE | 873 | Left Front Wheel Speed Sensor Low Reference |
| 29 | L-BU/WH | 2088 | Low Reference (JL4) |
| 30 | - | - | Not Used |
| 31 | BK/WH | 251 | Ground |
| 32-33 | - | - | Not Used |
| 34 | L-GN | 1763 | Steering Wheel Position Signal A (JL4) |
| 35 | L-BU | 1764 | Steering Wheel Position Signal B (JL4) |
| 36-37 | - | - | Not Used |
| 38 | OG/BK | 463 | Requested Torque Signal |
| 39 | D-GN | 872 | Right Front Wheel Speed Sensor Signal |
| 40 | - | - | Not Used |
| 41 | L-GN | 526 | Stop Lamp Supply Voltage |
| 42 | BN | 882 | Right Rear Wheel Speed Sensor Signal |
| 43 | WH | 883 | Right Rear Wheel Speed Sensor Low Reference |
| 44 | L-BU | 2088 | Low Reference (JL4) |
| 45 | - | - | Not Used |
| 46 | RD/BK | 1442 | Battery Positive Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.