Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 970 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Pontiac G6 GTP, 2D Coupe, Standard
Scan Tool Data List
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Radio/Integrated Radio Control (IRC)
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF/Radio ON | |||
| 8-Digit GM Part Number | Module Information | Numeric | Varies |
| Antenna Signal | System Configuration | Numeric | Varies |
| Auto. Set | System Configuration | Yes/No | Yes |
| Band Number | System Configuration | Numeric | Varies |
| Calibration ID | Module Information | Numeric | Varies |
| CD Changer | System Configuration | Yes/No | Yes (No if vehicle is not equipped with Remote CD Changer) |
| CD Focus Errors | CD Information | Numeric | Varies |
| CD Load/Unload Errors 6 |
CD Information | Numeric | Varies |
| CD Tracking Errors | CD Information | Numeric | Varies |
| Component Serial # 13-1 | Module Information | Numeric | Varies |
| Component Serial # 17-1 | Module Information | Numeric | Varies |
| Driver Number | System Configuration | 1/2 | 1 (2 if the memory 2 button has been activated) |
| Julian Date of Build | Module Information | Numeric | Varies |
| Preset Control | System Configuration | Preset 1-6/Not a Preset | Preset 1-6, if active radio station is a preset |
| PROM ID | Module Information | Numeric | Varies |
| Year Module Built | Module Information | Numeric | Varies |
| Theft Armed | System Configuration | Yes/No | No |
| Theft Lock | System Configuration | Yes/No | No |
| Total CD Hours | System Configuration | Numeric | Varies |
| Total Radio Hours | Module Information | Hrs. | Varies |
Digital Radio Receiver
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Radio ON | |||
| 8-Digit GM Part Number | ID Information/Module Information | Numeric | Varies |
| Battery Voltage | Data | Volts | Varies |
| Digital Radio Antenna | Data | Millivolts | Varies |
| Ignition Counter | Data | Numeric | Varies |
| Julian Date Of Build | ID Information/Module Information | Numeric | Varies |
| Power Mode | Data | - | run |
| Year Module Built | ID Information/Module Information | - | Varies |
| Electronic Serial Number | ID Information/Electronic Serial Number | Alphanumeric | Varies |
Vehicle Communications Interface Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON with Engine OFF | |||
| 8-Digit GM Part Number | Module 2 | 8 Digits | 93807890 |
| Component Serial Number 13-16 | Module 1 | 4 Digits | 0007 |
| Date | GPS Data | Date | DD/MM/YY |
| Electronic Serial Number | Module 2 | 11 Digits | 16832516749 |
| GPS Signal | GPS Data | Yes/No | Yes |
| Julian Date of Build | Module 1 | 3 Digits | 067 |
| Module ID | Module 2 | Alpha-numeric | Generation 6 |
| Signal Strength | Signal Strength | 0-100 | 68 |
| Signal Type | Signal Strength | Analog/Digital | Digital |
| Software ID | Module 1 | 3 Digits | 146 |
| Time | GPS Data | Time | HH:MM:SS |
| Transceiver ID | Signal Strength | 2-5 Digits | Varies |
| VCI Module Station ID | Module 2 | 10 Digits | 0002086783 |
| Year Module Built | Module 1 | 4 Digits | 2001 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.