Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 939 (VARIABLE EFFORT STEERING SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2006 Pontiac G6 GTP, 2D Coupe, Standard
Scan Tool Data List
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/ engine ON/ no vehicle speed present | |||
| ABS Reference Speed | VES Data | mph | 0 |
| LF Wheel Speed | VES Data | mph | 0 |
| LR Wheel Speed | VES Data | mph | 0 |
| RF Wheel Speed | VES Data | mph | 0 |
| RR Wheel Speed | VES Data | mph | 0 |
| Ignition Voltage | VES Data | Volts | 13.25 |
| Switched System Battery Voltage | VES Data | Volts | 13.25 |
| VES Failed | VES Data | Yes/No | No |
| VES Indicator Message | VES Data | On/Off | Off |
| VES Commanded Current | VES Data | amps | 1.00 |
| VES Feedback Current | VES Data | amps | 1.00 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.