SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 919 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTOR END VIEWSBODY CONTROL MODULE (BCM) C5
2006 Pontiac G6 GTP, 2D Coupe, Standard

Body Control Module (BCM) C5

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Body Control Module (BCM) C5
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) C5 Connector End View
GM1664500Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) C5 Connector & Terminal Parts Information

Connector Part Information 
  • OEM: HITPB-25-E-N
  • Service: See Catalog
  • Description: 25-Way F (BN)
Terminal Part Information 
  • Pins: 1, 2, 4, 5
  • Terminal/Tray: SNAC-A061T-M2.8/20
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094429/J-35616-4A (PU)
  • Pins: 5
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
  • Pins: 6, 8, 9, 10, 11, 13, 15, 16, 18, 20, 21, 23, 24
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
Body Control Module (BCM) C5 Terminal Identification

Pin Wire Color Circuit No. Function
1 YE 18 Left Rear Stop/Turn Lamp Supply Voltage
2 D-GN 19 Right Rear Stop/Turn Lamp Supply Voltage
3 - - Not Used
4 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage
5 L-BU 1320 Stop Lamp Relay Coil Supply Voltage
6 WH 17 Stop Lamp Switch Signal
7 - - Not Used
8 PK 5076 Current Sensor Supply Voltage
9 PU/WH 5075 Current Sensor Signal
10 BN 5077 Current Sensor Low Reference
11 BK/TN 707 RAP Relay Coil Supply Voltage
12 - - Not Used
13 L-GN/BN 5486 Run Relay Coil Control
14 - - Not Used
15 PU/OG 5531 Hood Closed Switch Signal
16 L-BU/WH 1134 Park Brake Switch Signal
17 - - Not Used
18 TN 28 Horn Relay Control
19 - - Not Used
20 GY 91 Wiper Relay Control
21 TN 860 Wiper High Speed Relay Control
22 - - Not Used
23 PK/WH 1970 Headlamp Low Beam Relay Control
24 D-BU 45 Park Lamp Relay Control
25 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.