SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 916 (SUNROOF SYSTEM)COMPONENT LOCATORSUNROOF CONNECTOR END VIEWSSUNROOF CONTROL MODULE (CF5)
2006 Pontiac G6 GTP, 2D Coupe, Standard

Sunroof Control Module (CF5)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Sunroof Control Module (CF5)
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Sunroof Control Module (CF5) Connector End View
GM1469285Courtesy of GENERAL MOTORS CORP.
Sunroof Control Module (CF5) Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 7283-8398-40
  • Service: See Catalog
  • Description: 14-Way F (GY)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Sunroof Control Module (CF5) Terminal Identification

Pin Wire Color Circuit No. Function
1 TN/GY 4440 Battery Positive Voltage
2 - - Not Used
3 TN 643 Accessory Voltage
4 BK 1050 Ground
5 OG 5029 Sunroof Switch Data 3
6 L-BU 5027 Sunroof Switch Data 1
7 BN 5028 Sunroof Switch Data 2
8 PU 5032 Sunroof Switch Data 6
9 L-GN 5030 Sunroof Switch Data 4
10 PK 5031 Sunroof Switch Data 5
11 - - Not Used
12 WH/RD 944 Not Used
13 WH/BU 1050 Not Used
14 WH/GN 944 Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.