SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 886 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)REPAIR INSTRUCTIONSAUDIO/VIDEO WIRING HARNESS REPLACEMENTINSTALLATION PROCEDURE
2006 Pontiac G6 GTP, 2D Coupe, Standard

Installation Procedure

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Installation Procedure
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Accessory Outlet Plate
    GM585388Courtesy of GENERAL MOTORS CORP.
  1. Install the accessory outlet plate to the floor console rear cover.
    2. Fig 2: View Of Accessory Outlet Plate Screws
    GM609870Courtesy of GENERAL MOTORS CORP.
  2. Install the screws (1) to the accessory outlet plate.
  3. Partially install the floor console rear cover.
  4. Connect the electrical connectors to the auxiliary outlets and audio video wiring harness.
    5. Fig 3: View Of Floor Console Rear Cover & Screws
    GM568396Courtesy of GENERAL MOTORS CORP.
  5. Install the floor console rear cover (3).
  6. Install the floor console rear cover (3) screws (1, 2).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.