SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 886 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTOR END VIEWSDIGITAL RADIO RECEIVER (DRR) (U2K)
2006 Pontiac G6 GTP, 2D Coupe, Standard

Digital Radio Receiver (DRR) (U2K)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Digital Radio Receiver (DRR) (U2K)
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Digital Radio Receiver (DRR) (U2K) Connector End View
GM1664490Courtesy of GENERAL MOTORS CORP.
Digital Radio Receiver (DRR) (U2K) Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 7283-9076-30
  • Service: 15136073
  • Description: 16-Way F (BK)
Terminal Part Information 
  • Pins: 1, 2, 3, 4, 5, 9, 16
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
Digital Radio Receiver (DRR) (U2K) Terminal Identification

Pin Wire Color Circuit No. Function
1 TN/WH 372 Remote Radio Audio (-)
2 BN/WH 367 Remote Radio Left Audio Signal
3 GY 388 Remote Radio Right Audio Signal (2)
4 D-GN/WH 368 Remote Radio Right Audio Signal (1)
5 D-GN 5060 Low Speed GMLAN Serial Data
6-8 - - Not Used
9 BK 550 Ground
10-15 - - Not Used
16 RD/WH 2040 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.