SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 886 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTOR END VIEWSAMPLIFIER C1 (UQA)
2006 Pontiac G6 GTP, 2D Coupe, Standard

Amplifier C1 (UQA)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Amplifier C1 (UQA)
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Amplifier C1 (UQA) Connector End View
GM1664463Courtesy of GENERAL MOTORS CORP.
Amplifier C1 (UQA) Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 6098-4713
  • Service: 88988652
  • Description: 8-Way F (BK)
Terminal Part Information 
  • Pins: 2
  • Terminal/Tray: 8100-4445/22
  • Core/Insulation Crimp: F/D
  • Release Tool/Test Probe: 15315247/J-35616-35 (VT)
  • Pins: 3, 4, 7, 8
  • Terminal/Tray: 8100-4444/22
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-35 (VT)
Amplifier C1 (UQA) Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 D-BU/WH 5771 Left Front Speaker Signal (-)
3 L-BU/BK 5772 Right Front Speaker Signal (-)
4 BK 550 Ground
5 - - Not Used
6 D-BU 5761 Left Front Speaker (+)
7 L-BU 5762 Right Front Speaker (+)
8 TN/D-BU 3440 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.