SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 883 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSFRONT FOG LAMP BULB REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard

Front Fog Lamp Bulb Replacement

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Front Fog Lamp Bulb Replacement
WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fog Lamp Components
GM1576126Courtesy of GENERAL MOTORS CORP.
Front Fog Lamp Bulb Replacement

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .
Remove either the LF or RF forward wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
Preliminary Procedure: 
Disconnect the electrical connector from the fog lamp bulb socket assembly.
1 Front Fog Lamp Bulb
CAUTION: Refer to Halogen Bulb Caution .

Tip:  Disconnect the fog lamp bulb socket from the fog lamp housing by rotating the bulb socket a quarter turn counterclockwise.
2 Fog Lamp Housing
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.