SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 845 (DATA COMMUNICATION SYSTEM)COMPONENT LOCATORDATA COMMUNICATION CONNECTORSBODY CONTROL MODULE (BCM) C7
2006 Pontiac G6 GTP, 2D Coupe, Standard

Body Control Module (BCM) C7

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Body Control Module (BCM) C7
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) C7 Connector End Views
GM1664505Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) C7 Connector Parts Information

Connector Part Information 
  • OEM: 15466053
  • Service: See Catalog
  • Description: 28-Way F Receptacle 0.64 (GY)
Terminal Part Information 
  • Terminal/Tray: SNAC3-A021T-M0.64/20
  • Core/Insulation Crimp: J/J
  • Release Tool/Test Probe: 12094429/J-35616-64A (L-BU)
Body Control Module (BCM) C7 Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 - - Not Used
2 L-BU 1344 Trunk Release Relay Control
3-5 - - Not Used
6 YE 356 Driver Door Unlock Relay Control
7 L-GN 1391 Door Lock Relay Control
8 - - Not Used
9 L-BU 5921 Door Unlock Relay Control
10 - - Not Used
11 OG/BK 781 Driver Door Lock Switch Unlock Signal
12 OG/BK 780 Driver Door Lock Switch Lock Signal
13-22 - - Not Used
23 TN 126 Left Front Door Open Switch Signal
24-28 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.