Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 81 (CRUISE CONTROL SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSYMPTOMS - CRUISE CONTROLNOTES
2006 Pontiac G6 GTP, 2D Coupe, Standard
Symptoms - Cruise Control: Notes
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Notes
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The following steps must be completed before using the symptom tables.
- Before using the symptom diagnostic table, perform the Diagnostic System Check - Vehicle
in Vehicle DTC Information, in order to verify the following conditions:
- There are no DTCs set.
- The module can communicate via the serial data link.
- Review the system operation in order to understand the system functions. Refer to Cruise Control Description and Operation (3.6L) or Cruise Control Description and Operation (3.8L) .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.