Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 799 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESDIAGNOSTIC CODE INDEX
2006 Pontiac G6 GTP, 2D Coupe, Standard
Diagnostic Code Index
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Diagnostic Code Index
WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC CODE INDEX
| DTC | Description |
|---|---|
| DTC B0012 or B0013 | Driver Frontal Deployment Loop Stages 1 & 2 |
| DTC B0014 | Left Front Side Deployment Loop |
| DTC B0015 | Left Front Seat Belt Pretensioner Deployment Loop |
| DTC B0016 | Left Roof Rail Deployment Loop |
| DTC B0019 or B0020 | Passenger Frontal Deployment Loop Stage 1 & 2 |
| DTC B0021 | Right Front Side Deployment Loop |
| DTC B0022 | Right Front Seat Belt Pretensioner Deployment Loop |
| DTC B0023 | Right Roof Rail Deployment Loop |
| DTC B0052 or B0053 | Deployment Commanded & with Loop DTCs Present |
| DTC B0055 | Side Airbag Deployment Commanded |
| DTC B0056 | Passenger Frontal Airbag Suppressed |
| DTC B0057 | Passenger Side Airbag Suppressed |
| DTC B0071 | Passenger Seat Belt Tension Sensor Circuit |
| DTC B0074 | Passenger Occupant Classification Circuit |
| DTC B0081 | Passenger Presence System |
| DTC B0083 or B0084 | Front End Sensor 1 & 2 |
| DTC B0085 or B0086 | Left & Right Front Side Impact Sensor |
| DTC B1001 | SDM Option Configuration Error |
| DTC B1019 | System Configuration |
| DTC B1370 | Device Ignition 1 Circuit Short |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.