Fastener Tightening Specifications

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Inner Tie Rod 100 N.m 74 lb ft
Outer Tie Rod Nut 30 N.m + 115Β° 44 lb ft + 115Β°
Power Steering Cooler Bolt 9 N.m 80 lb in
Power Steering Hose Clamp 10 N.m 89 lb in
Power Steering Gear Nut/Bolt 60 N.m + 120Β° 44 lb ft + 120Β°
Power Steering Hose Bracket Bolt 17 N.m 13 lb ft
Power Steering Inlet Pipe/Hose Fitting 27 N.m 20 lb ft
Power Steering Outlet Pipe/Hose Fitting 27 N.m 20 lb ft
Power Steering Pump Bolt 22 N.m 16 lb ft
Power Steering Reservoir Bolt 10 N.m 89 lb in
Power Steering Reservoir Bracket Bolt 58 N.m 43 lb ft
Power Steering Tensioner Bolt 22 N.m 16 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.