Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 752 (PROGRAMMING AND SETUP - ALL SYSTEMS)REPAIR INSTRUCTIONSREMOTE CONTROL DOOR LOCK RECEIVER PROGRAMMING AND SETUPREMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard
Remote Control Door Lock Receiver Replacement
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Remote Control Door Lock Receiver Replacement
WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.
If the remote control door lock receiver is replaced, the following setup procedure must be performed with the scan tool:
- Install a scan tool.
- Turn On the ignition with the engine OFF.
- Select Body.
- Select Remote Control Door Lock Receiver (RCDLR).
- Select Module Setup.
- Select Setup New RCDLR.
- Follow the scan tool instructions.
- Remove scan tool and exit vehicle when setup is done.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.