SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 733 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)REPAIR INSTRUCTIONSDIGITAL RADIO RECEIVER REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard

Digital Radio Receiver Replacement

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Digital Radio Receiver Replacement
WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Digital Radio Receiver
GM1584962Courtesy of GENERAL MOTORS CORP.
Digital Radio Receiver Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the rear compartment trim. Refer# to Rear Compartment Trim Panel Replacement .
  2. Program the digital radio receiver after replacement. Refer# to Control Module References .
1 Digital Radio Receiver Bracket Nuts (Qty: 2)
NOTE: Refer# to Fastener Notice .

Tighten:  10 N.m (89 lb in)
2 Digital Radio Receiver Bracket Assembly
3 Digital Radio Receiver Nuts (Qty: 3)

Tighten:  5 N.m (44 lb in)
4 Digital Radio Receiver Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.