Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 733 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTOR END VIEWSVEHICLE COMMUNICATION INTERFACE MODULE (VCIM) C1
2006 Pontiac G6 GTP, 2D Coupe, Standard
Vehicle Communication Interface Module (VCIM) C1
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Vehicle Communication Interface Module (VCIM) C1
WARNING: This page is about a different car, the 2007 Saturn Sky. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle Communication Interface Module (VCIM) C1 Connector Part Information
Connector Part Information
|
Terminal Part Information
|
Vehicle Communication Interface Module (VCIM) C1 Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | - | - | Not Used |
| 2 | BN/WH | 2517 | Keypad Red LED Signal (UE1) |
| 3 | YE/BK | 2516 | Keypad Green LED Signal (UE1) |
| 4-5 | - | - | Not Used |
| 6 | L-GN/BK | 2515 | Keypad Supply Voltage (UE1) |
| 7 | - | - | Not Used |
| 8 | BK/WH | 851 | Ground (UE1) |
| 9-10 | - | - | Not Used |
| 11 | D-GN/WH | 2514 | Keypad Signal (UE1) |
| 12-14 | - | - | Not Used |
| 15 | RD/WH | 1340 | Battery Positive Voltage |
| 16 | - | - | Not Used |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.