Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 677 (ANTI-LOCK BRAKE SYSTEM & TRACTION CONTROL SYSTEM)COMPONENT LOCATORANTILOCK BRAKE SYSTEM COMPONENT VIEWS
2006 Pontiac G6 GTP, 2D Coupe, Standard
Antilock Brake System Component Views
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Antilock Brake System Component Views
WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Wheel Speed Sensor (WSS) - LF |
| 2 | Wheel Speed Sensor (WSS) - RF |
| 3 | Wheel Speed Sensor (WSS) - RR |
| 4 | Wheel Speed Sensor (WSS) - LR |
| Callout | Component Name |
|---|---|
| 1 | Coolant Level Switch |
| 2 | Battery |
| 3 | Electronic Brake Control Module (EBCM) |
| 4 | C101 |
| 5 | G103 |
| 6 | Fuse Block - Underhood |
| 7 | Powertrain Control Module (PCM) |
| 8 | Powertrain Control Module (PCM), C3 |
| 9 | Powertrain Control Module (PCM), C2 |
| 10 | Powertrain Control Module (PCM), C1 |
| Callout | Component Name |
|---|---|
| 1 | C214 |
| 2 | Cigar Lighter |
| 3 | Traction Control Switch (NW7/NW9) or Auxiliary Power Outlet - Front (w/o NW7/NW9) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.