SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 651 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSDIGITAL RADIO RECEIVER (U2K)
2006 Pontiac G6 GTP, 2D Coupe, Standard

Digital Radio Receiver (U2K)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Digital Radio Receiver (U2K)
WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Digital Radio Receiver Connector End View (U2K)
GM850856Courtesy of GENERAL MOTORS CORP.
Digital Radio Receiver Connector Part Information (U2K)

Connector Part Information 
  • OEM: 15416970
  • Service: 22715969
  • Description: 16-Way F Micro-Pack 64 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
Digital Radio Receiver Connector Terminal Identification (U2K)

Pin Wire Color Circuit No. Function
1 - - Not Used
2 BN/WH 367 Left Audio Signal (+)
3 D-GN/WH 368 Right Audio Signal (+)
4 - - Not Used
5 D-GN 5060 Low Speed GMLAN Serial Data
6 D-GN 5060 Low Speed GMLAN Serial Data
7-8 - - Not Used
9 BK 1050 Ground
10 TN/WH 372 Audio Common
11 BARE 814 Drain Wire
12-15 - - Not Used
16 RD/WH 1240 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.