Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 646 (LIGHTING SYSTEMS)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL OUTPUT CONTROLS
2006 Pontiac G6 GTP, 2D Coupe, Standard
Scan Tool Output Controls
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Scan Tool Output Controls
WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)
| Scan Tool Output Control | Additional Menu Selection | Description |
|---|---|---|
| Headlamps | Special Functions | The BCM actuates the low beam headlamps when you select ON. The headlamps should illuminate until commanded OFF. |
| Interior Lamps | Special Functions | The BCM actuates the interior lamp control you select ON. The foot well, and courtesy lamps should illuminate until commanded OFF. |
| High Beam Lamp | Special Functions | The BCM actuates the high beam headlamps when you select ON. The headlamps should illuminate until commanded OFF |
| Parking Lamps | Special Functions | The BCM actuates the park lamp relay when you select ON. The park lamps should illuminate until commanded OFF. |
| Backup Lamps | Special Functions | The BCM actuates the back up lamps when you select ON. The back up lamps should illuminate until commanded OFF. |
| Front Fog Lamps | Special Functions | The BCM actuates the fog lamps when you select ON. The front fog lamps should illuminate until commanded OFF. |
| Inadvertent Power Relay | Special Functions | The BCM actuates the inadvertent power relay when you select ON. The inadvertent power relay should remain on until commanded OFF. |
| BPP Sensor Calibration | Special Functions | The BCM calibrates the brake pedal position sensor (BPP) to zero. |
| RF Turn Signal | Special Functions | The BCM actuates the right front turn signal when you select ON. The right front turn signal should remain on until commanded OFF. |
| LF Turn Signal | Special Functions | The BCM actuates the left front turn signal when you select ON. The left front turn signal should remain on until commanded OFF. |
| LR Turn Signal | Special Functions | The BCM actuates the left rear turn signal when you select ON. The left rear turn signal should remain on until commanded OFF. |
| RR Turn Signal | Special Functions | The BCM actuates the right rear turn signal when you select ON. The right rear turn signal should remain on until commanded OFF. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.