SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 605 (SUSPENSION CONTROL SYSTEM - SUSPENSION LEVELING)COMPONENT LOCATORAUTOMATIC LEVEL CONTROL CONNECTOR END VIEWSAUTOMATIC LEVEL CONTROL MODULE (FE1, FE3, F41)
2006 Pontiac G6 GTP, 2D Coupe, Standard

Automatic Level Control Module (FE1, FE3, F41)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Automatic Level Control Module (FE1, FE3, F41)
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Automatic Level Control Module (FE1, FE3, F41) Connector End View
GM632344Courtesy of GENERAL MOTORS CORP.
Automatic Level Control Connector End Views

Connector Part Information 
  • OEM: 15326842
  • Service: 15326842
  • Description: 10-Way F 150 Series Sealed (BK)
Terminal Part Information 
  • Pins: A, C, D, E, F, G, H, J, K
  • Terminal/Tray: 12191819/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
Automatic Level Control Module (FE1, FE3, F41)

Pin Wire Color Circuit No. Function
A WH 320 Automatic Level Control Exhaust Solenoid Control
B - - Not Used
C BK 850 Ground
D TN/BK 2500 High Speed GMLAN Serial Data Bus +
E RD/WH 3340 Battery Positive Voltage
F YE 321 Automatic Level Control Relay Control
G TN 2501 High Speed GMLAN Serial Data Bus-
H TN 2501 High Speed GMLAN Serial Data Bus-
J TN/BK 2500 High Speed GMLAN Serial Data Bus +
K OG/YE 5727 High Speed GMLAN Serial Data Wake Up
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.