Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 6 (LIGHTING SYSTEMS)COMPONENT LOCATORLIGHTING SYSTEMS CONNECTOR END VIEWS
2006 Pontiac G6 GTP, 2D Coupe, Standard
Lighting Systems Connector End Views
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Lighting Systems Connector End Views
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
Ambient Light Sensor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-GN/BK | 1137 | DRL Ambient Light Sensor Signal |
| B | YE/BK | 1138 | DRL Ambient Light Low Reference |
| C | BK | 476 | Low Reference |
| D | L-BU/BK | 590 | Sunload Sensor Signal |
Rear Compartment Lamp Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | RD/BK | 744 | Rear Compartment Lid Ajar Switch |
| 2 | OG | 1732 | Courtesy Lamps Supply Voltage |
Center High Mounted Stop Lamp (CHMSL) Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | L-BU | 20 | Stop Lamp Supply Voltage |
| B | BK | 450 | Ground |
Daytime Running Lamp (DRL) Resistor Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | D-BU | 545 | DRL Supply Voltage |
| B | BK | 150 | Ground |
Dimmer/Rear Compartment Lid Release Switch Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 1576 | Rear Compartment Lid Release Switch |
| B-C | - | - | Not Used |
| D | OG | 2540 | Battery Positive Voltage |
| E | GY | 8 | Instrument Panel Lamp Supply Voltage |
| F | BK | 550 | Ground |
| G | GY/BK | 1381 | LCD Dimming Signal |
| H | GY | 1359 | LCD Backlighting Lamp Control |
Door Jamb Switch - Driver Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | GY/BK | 745 | Left Front Door Ajar Switch Signal |
Door Jamb Switch - Front Passenger Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | BK/WH | 746 | Right Front Door Ajar Switch Signal |
Door Jamb Switch - LR Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | BK/WH | 746 | Right Front Door Ajar Switch Signal |
Door Jamb Switch - RR Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | BK/WH | 746 | Right Front Door Ajar Switch Signal |
Dome Lamps Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | WH | 156 | Courtesy Lamp Low Control |
| B | BK | 450 | Ground |
| C | OG | 1732 | Courtesy Lamps Supply Voltage |
I/P Compartment Lamp Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | OG | 1732 | Courtesy Lamps Supply Voltage |
Hazard Switch Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 550 | Ground |
| B | OG | 1040 | Battery Positive Voltage |
| C | PK | 239 | Ignition 1 Voltage |
| D | - | - | Not Used |
| E | GY | 8 | Instrument Panel Lamps Dimmer Switch Signal |
| F | L-BU | 14 | Left Turn Signal Lamps Supply Voltage |
| G | D-BU | 15 | Right Turn Signal Lamps Supply Voltage |
| H-J | - | - | Not Used |
| K | PU | 16 | Turn Signal Flasher Signal |
Headlamp/Turn Signal Switch Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK | 550 | Ground |
| 2 | L-BU | 14 | Left Turn Signal Lamps Supply Voltage |
| 3 | GY | 691 | Headlamp Switch |
| 4 | PU | 16 | Turn Signal Flasher Signal |
| 5 | D-BU | 1201 | Headlamp Low Beam Signal |
| 6 | D-BU | 15 | Right Turn Signal Lamps Supply Voltage |
| 7 | PK | 1200 | Headlamp High Beam Signal |
| 8 | L-BU | 74 | Park Lamp Switch Signal |
Headlamp - Left - High Beam Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | OG | 40 | Battery Positive Voltage |
| 2 | PK | 1200 | Headlamp High Beam Signal |
Headlamp - Right - High Beam Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | OG | 140 | Battery Positive Voltage |
| 2 | PK | 1200 | Headlamp High Beam Signal |
Headlamp - Left - Low Beam Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | OG | 40 | Battery Positive Voltage |
| 2 | D-BU | 1201 | Headlamp Low Beam Signal |
Headlamp - Right - Low Beam Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | OG | 140 | Battery Positive Voltage |
| 2 | D-BU | 1201 | Headlamp Low Beam Signal |
Inside Rearview Mirror (ISRVM) Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | - | - | Not Used |
| 2 | BK | 450 | Ground |
| 3-6 | - | - | Not Used |
| 7 | D-BU/WH | 1732 | Courtesy Lamps Supply Voltage |
License Lamps Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BN | 9 | Park Lamp Supply Voltage |
| B | BK | 650 | Ground |
Park/Turn Signal Lamp - LF Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 150 | Ground |
| B | BN | 9 | Park Lamp Supply Voltage |
| C | L-BU | 14 | Left Turn Signal Lamps Supply Voltage |
Park/Turn Signal Lamp - RF Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | BK | 150 | Ground |
| B | BN | 9 | Park Lamp Supply Voltage |
| C | D-BU | 15 | Right Turn Signal Lamps Supply Voltage |
Marker Lamp - LF Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BN | 9 | Park Lamp Supply Voltage |
| 2 | BK | 150 | Ground |
Marker Lamp - RF Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BN | 9 | Park Lamp Supply Voltage |
| 2 | BK | 150 | Ground |
Stop Lamp Switch Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1-2 | - | - | Not Used |
| 3 | L-BU | 20 | Stop Lamp Switch Signal |
| 4 | OG | 540 | Battery Positive Voltage |
Tail Lamp Assembly - Left Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | L-GN | 24 | Backup Lamp Supply Voltage |
| 2 | L-BU | 14 | Left Turn Signal Lamps Supply Voltage |
| 3 | BK | 650 | Ground |
| 4 | L-BU | 20 | Stop Lamp Supply Voltage |
| 5 | BN | 9 | Park Lamp Supply Voltage |
| 6 | BK | 650 | Ground |
Tail Lamp Assembly - Right Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| 1 | BK | 650 | Ground |
| 2 | L-BU | 20 | Stop Lamp |
| 3 | BN | 9 | Park Lamp |
| 4 | BK | 650 | Ground |
| 5 | D-BU | 15 | Turn Lamp |
| 6 | L-GN | 24 | Back-up Lamp |
Vanity Lamps Connector End View
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | OG | 1732 | Courtesy Lamps Supply Voltage |
| B | BK | 450 | Ground |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.