SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 583 (HVAC SYSTEMS - AUTOMATIC)COMPONENT LOCATORHVAC CONNECTOR END VIEWSHVAC CONTROL MODULE C3
2006 Pontiac G6 GTP, 2D Coupe, Standard

HVAC Control Module C3

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION HVAC Control Module C3
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: HVAC Control Module C3 Connector End View
GM1664588Courtesy of GENERAL MOTORS CORP.
HVAC Connector End Views

Connector Part Information 
  • OEM: 7283-4548-60
  • Service: See Catalog
  • Description: 18-Way F (GN)
Terminal Part Information 
  • Pins: 1, 2, 4, 5, 6, 7, 13, 14, 15, 16
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
HVAC Control Module C3

Pin Wire Color Circuit No. Function
1 PU/WH 1382 LED Dimming Signal
2 YE 1491 Backlight Lamp Control
3 - - Not Used
4 WH/BK 1236 Passenger Air Temperature Door Control B
5 L-BU/YE 1199 Driver Air Temperature Door Control B
6 D-GN 1614 Recirculation Door Control B
7 YE/WH 1318 Lower Mode Door Control B
8-12 - - Not Used
13 L-BU/PU 1641 Passenger Air Temperature Door Control A
14 YE/GY 1791 Driver Air Temperature Door Control A
15 TN/BK 2274 Recirculation Door Control A
16 TN 2273 Mode Door Control A
17-18 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.