Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 574 (ANTILOCK BRAKE SYSTEM WITH TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)REPAIR INSTRUCTIONSBRAKE PRESSURE MODULATOR VALVE BRACKET REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard
Brake Pressure Modulator Valve Bracket Replacement
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Brake Pressure Modulator Valve Bracket Replacement
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Brake Pressure Modulator Valve Bracket Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement |
|
| 1 | Brake Pressure Modulator Valve (BPMV) Mounting Bolt - Upper
NOTE:
Refer to Fastener Notice
.
Tighten: 12 N.m (106 lb ft) |
| 2 | BPMV Mounting Bolt - Lower (Qty: 2) Tighten: 12 N.m (106 lb ft) |
| 3 | BPMV Bracket |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.