Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 557 (COMPUTER/INTEGRATING SYSTEMS)COMPONENT LOCATORCOMPUTER/INTEGRATING SYSTEMS CONNECTOR END VIEWSBODY CONTROL MODULEBODY CONTROL MODULE (BCM) C3
2006 Pontiac G6 GTP, 2D Coupe, Standard
Body Control Module (BCM) C3
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Body Control Module (BCM) C3
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Computer/Integrating Systems Connector End Views
Connector Part Information
|
Terminal Part Information
|
Body Control Module (BCM) C3
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | BK | 450 | Ground |
| 2 | D-GN/PU | 1940 | Battery Positive Voltage (Early Production) |
| D-GN/GY | 1940 | Battery Positive Voltage (Late Production) | |
| 3 | PK/GY | 3040 | Battery Positive Voltage |
| 4 | - | - | Not Used |
| 5 | BK | 450 | Ground |
| 6-7 | - | - | Not Used |
| 8 | TN/BK | 2500 | High Speed GMLAN Serial Data Bus + |
| 9 | TN | 2501 | High Speed GMLAN Serial Data Bus - |
| 10 | D-GN | 5060 | Low Speed GMLAN Serial Data |
| 11 | PK | 1444 | I/P Dimming Signal |
| 12 | OG/WH | 812 | 12 Volt Reference |
| 13 | L-BU/YE | 5361 | Brake Apply Sensor Signal |
| 14 | L-BU/BK | 853 | Brake Apply Sensor Low Reference |
| 15 | GY | 5381 | Brake Apply Sensor 5 Volt Reference |
| 16 | TN/BK | 2500 | High Speed GMLAN Serial Data Bus + |
| 17 | TN | 2501 | High Speed GMLAN Serial Data Bus - |
| 18 | YE | 1491 | Backlight Lamp Control |
| 19 | OG/YE | 5727 | High Speed GMLAN Serial Data Wake Up |
| 20 | - | - | Not Used |
| 21 | OG | 192 | Front Fog Lamp Switch Signal (T96) |
| 22 | D-GN/WH | 7158 | Cruise Control Indicator Dimming Signal |
| 23-24 | - | - | Not Used |
| 25 | PU/WH | 1382 | LED Dimming Signal |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.