SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 439 (HVAC SYSTEMS - MANUAL)COMPONENT LOCATORHVAC CONNECTORSHVAC CONTROL MODULE C2
2006 Pontiac G6 GTP, 2D Coupe, Standard

HVAC Control Module C2

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION HVAC Control Module C2
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: HVAC Control Module C2 Connector End View
GM684939Courtesy of GENERAL MOTORS CORP.
HVAC Connector End Views

Connector Part Information 
  • OEM: 15336594
  • Service: Not Serviced
  • Description: 12-Way F Micro-Pack 100 Series (GY)
Terminal Part Information 
  • Pins: A, G
  • Terminal: 12146448/Tray 19
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12031876-1/J-35616-6
  • Pins: C-F, H-M
  • Terminal: 12146447/Tray 3
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12031876-1/J-35616-6
HVAC Control Module C2

Pin Wire Color Circuit No. Function
A D-GN 71 Off Blower Motor Control
B - - Not Used
C GY 2614 Auxiliary Mode Door Control (C69)
D OG 2215 Auxiliary Air Temperature Door Control (C69)
E D-BU 1199 Left Air Temperature Door Control
F YE 1791 Common Door Control
G OG 52 Blower Motor High Control
H TN/BK 2274 Recirculation Door Control
J WH/BK 1236 Right Air Temperature Door Control
K TN 2273 Vent and Floor Door Control
L WH 119 Defrost Door Control
M D-GN 2211 Auxiliary Blower Motor Speed Control (C69)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.