SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 429 (SUSPENSION CONTROL SYSTEM - SUSPENSION LEVELING)COMPONENT LOCATORAUTOMATIC LEVEL CONTROL SUSPENSION CONNECTORSAUTOMATIC LEVEL CONTROL (ALC) SENSOR (G67)
2006 Pontiac G6 GTP, 2D Coupe, Standard

Automatic Level Control (ALC) Sensor (G67)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Automatic Level Control (ALC) Sensor (G67)
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Automatic Level Control (ALC) Sensor (G67) Connector End View
GM831368Courtesy of GENERAL MOTORS CORP.
Automatic Level Control Suspension Connector End Views

Connector Part Information 
  • OEM: 15326836
  • Service: 88986255
  • Description: 8-Way F GT 150 Series Sealed (BK)
Terminal Part Information 
  • Terminal: 12191819/Tray 8
  • Core/Insulation Crimp: 2/A
  • Release Tool/Test Probe: 15315247/J-35616-2A
Automatic Level Control (ALC) Sensor (G67)

Pin Wire Color Circuit No. Function
A WH 320 Automatic Level Control Exhaust Solenoid Control
B YE 321 Automatic Level Control Relay Control
C BK 350 Ground
D YE/BK 643 Accessory Voltage
E L-BU 1770 Automatic Level Control Inflator Indicator Control
F WH 837 Automatic Level Control Inflator Solenoid Control
G WH/BK 1245 Automatic Level Control Inflation Timer Control
H RD/WH 140 Battery Positive Voltage
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.