SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 426 (WHEEL ALIGNMENT SYSTEM)SPECIFICATIONSWHEEL ALIGNMENT SPECIFICATIONS
2006 Pontiac G6 GTP, 2D Coupe, Standard

Wheel Alignment Specifications

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Wheel Alignment Specifications
WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Alignment Specifications

Suspension Camber Camber Cross Caster Caster Cross Tolerance Total Toe Steering Wheel Angle Thrust Angle
Front Wheel Drive
Front -0.65° +/- 0.75° +/- 0.75° 3.05° +/- 0.75° +/- 0.75° 0.00° +/- 0.20° 0.00° +/- 3.50° -
Rear -1.00° +/- 0.50° +/- 0.50° - - 0.00° +/- 0.30° - 0.00° +/- 0.30°
All Wheel Drive and I.R.S.
Front -0.65° +/- 0.75° +/- 0.75° 3.05°+/- 0.75° +/- 0.75° 0.00° +/- 0.20° 0.00° +/- 3.50° -
Rear -0.40° +/- 0.60° +/-0.60° - - 0.00° +/- 0.20° - 0.00° +/- 0.25°
Caster (Nominal - No means of adjustment provided)
Camber Cross Tolerance (Nominal - No means of adjustment provided)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.