Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 326 (PERSONALIZATION SYSTEMS)DESCRIPTION AND OPERATIONVEHICLE PERSONALIZATIONPROGRAMMING FEATURES WITH THE TECH 2DELAY INTERIOR LIGHTSREMOTE VISUAL VERIFICATION MODE
2006 Pontiac G6 GTP, 2D Coupe, Standard
Remote Visual Verification Mode
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Remote Visual Verification Mode
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Continue with the following steps in order to program the Remote Visual Verification Mode:
- Select Set Options.
- Select F3 for Remote Visual Verification Mode.
- Highlight the desired mode.
- Press the ENTER button to turn the mode ON or OFF. You must turn the current mode OFF before you can turn another one ON.
- Select Save Options.
- Exit the menu.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.