Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 307 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSHEADLAMP SWITCH REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard
Headlamp Switch Replacement
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Headlamp Switch Replacement
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Headlamp Switch Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications
. |
|
| 1 | Trim Plate, Instrument Panel Cluster Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster . |
| 2 | Screw, Instrument Panel Cluster Trim Plate (Qty: 2) Tighten: 2 N.m (18 lb in) |
| 3 | Switch Assembly, Fog Lamp and Headlamp |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.