Cellular Communication Connector End Views

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Cellular Communication Connector End Views
WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Vehicle Communication Interface Module (VCIM) C1

GM814530Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 917981-1
  • 16-Way M MK 11 Hybrid (WH)
Pin Wire Color Circuit No. Function
1 - - Not Used
2 BN/WH 2517 Keypad Red LED Signal
3 YE/BK 2516 Keypad Green LED Signal
4-5 - - Not Used
6 L-GN/BK 2515 Keypad Supply Voltage
7 BK/WH 151 Ground
8-10 - - Not Used
11 D-GN/WH 2514 Keypad Signal
12-15 - - Not Used
16 OG 1640 Battery Positive Voltage
Vehicle Communication Interface Module (VCIM) C2

GM814532Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 917975-1
  • 12-Way M MK11 Hybrid (WH)
Pin Wire Color Circuit No. Function
1 PK/BK 2062 Remote Radio Left Audio Signal
2 OG/BK 2061 Remote Radio Right Audio Signal
3-5 - - Not Used
6 PU 1807 Class 2 Serial Data
7 - - Not Used
8 BARE 814 Drain Wire
9 GY 655 Cellular Microphone Signal
10 BARE 654 Cellular Microphone Low Reference
11 - - Not Used
12 YE/BK 693 Cellular Telephone Mute Signal
Cellular Telephone Microphone

GM35441Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12047663/12047662
  • 2-Way M Metri-Pack 150 Series (BK)
Pin Wire Color Circuit No. Function
A BARE 654 Cellular Microphone Low Reference
B GY 655 Cellular Microphone Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.