Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 210 (WHEEL ALIGNMENT SYSTEM)SPECIFICATIONSTRIM HEIGHT SPECIFICATIONS
2006 Pontiac G6 GTP, 2D Coupe, Standard
Trim Height Specifications
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Trim Height Specifications
WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
Trim Height Specifications
| Model | Suspension | Tire Size | Engine | Z | D | J | K |
|---|---|---|---|---|---|---|---|
| 1ZS69, 1ZT69 | FE0 | P 205/65R15 | L61, LX9 | 71 mm (2.8 in) | 174 mm (6.85 in) | 229 mm (9 in) | 234 mm (9.21 in) |
| 1ZS69, 1ZU69 | FE0 | P 215/60R16 | L61, LX9 | 67 mm (2.64 in) | 169 mm (6.65 in) | 236 mm (9.29 in) | 240 mm (9.45 in) |
| 1ZS68, 1ZT68, 1ZU68 | FE0 | P 215/60R16 | LX9 | 68 mm (2.68 in) | 171 mm (6.73 in) | 236 mm (9.29 in) | 240 mm (9.45 in) |
| 2ZG69 | FE0 | P 215/60R16 | LX9 | 68 mm (2.70 in) | 171 mm (6.70 in) | 230 mm (9.06 in) | 248 mm (9.76 in) |
| 2ZH69 | FE2 | P 225/50R17 | LX9 | 58 mm (2.30 in) | 168 mm (6.60 in) | 219 mm (8.62 in) | 242 mm (9.53 in) |
| All measurements taken with a full tank of gas. All measurements have a tolerance of +/- 10 mm (0.39 in). |
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.