SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 172 (SEAT SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2006 Pontiac G6 GTP, 2D Coupe, Standard

Fastener Tightening Specifications

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Front Seat Adjuster Bolts 30 N.m 22 lb ft
Front Seat Belt Buckle Bolt 32 N.m 24 lb ft
Front Seat Mounting Bolt 45 N.m 33 lb ft
Horizontal Seat Adjuster Screws 3 N.m 26 lb in
Seat Adjuster Mechanism Bolts 7 N.m 62 lb in
Seat Back Bolster Bolts 28 N.m 20 lb ft
Seat Back Frame to Body Bolts 35 N.m 26 lb ft
Seat Back to Frame Bolts 35 N.m 26 lb ft
Seat Cushion Outer Trim Panel Screw 2.5 N.m 22 lb in
Tilt Seat Adjuster Bolt 7 N.m 62 lb in
Vertical Seat Adjuster Bolt 7 N.m 62 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.