Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 17 (DOOR SYSTEM, MIRROR SYSTEM & WINDOW SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESPOWER WINDOWS INOPERATIVE - EXPRESS DOWN FUNCTION
2006 Pontiac G6 GTP, 2D Coupe, Standard
Power Windows Inoperative - Express Down Function
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Power Windows Inoperative - Express Down Function
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
Power Windows Inoperative - Express Down Function
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Power Window Schematics Connector End View Reference: Power Door Systems Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 | Operate the driver window. Does the window operate normally with the exception of the express down function? |
Go to Step 3 | Go to Symptoms - Doors |
| 3 | Replace the driver power window switch. Refer to Power Window Switch Replacement . Is the repair complete? |
Go to Step 4 | - |
| 4 | Operate the system to verify the repair. Did you correct the condition? |
System OK | - |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.