SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1496 (COMPONENT CONNECTOR END VIEWS (3 OF 4))INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL X2
2006 Pontiac G6 GTP, 2D Coupe, Standard

Inflatable Restraint Steering Wheel Module Coil X2

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Inflatable Restraint Steering Wheel Module Coil X2
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Steering Wheel Module Coil X2 Connector End View
GM1593397Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Steering Wheel Module Coil X2

Pin Wire Circuit Function
A - - Not Used
B PU 5526 Tap Up/Tap Down Switch Signal (KB7)
C 0.35 D-BU 1796 Steering Wheel Controls Signal
D 0.35 WH/BK 644 10-Volt Reference
E 0.35 PK 339 Ignition 1 Voltage
F 0.35 GY 1884 Cruise Control Switch Signal
G 0.35 YE 390 Instrument Panel Lamp Supply Voltage - 3
H 0.35 D-GN/WH 1358 DIC Switch Signal
J 0.35 TN 28 Horn Relay Control
K 0.5 BKWH 651 Ground
Connector Part Information 
  • OEM: 15393433
  • Service: 22710638
  • Description: 10-Way F Micro-Pack 064 Series (BK)
Terminal Part Information 
  • Terminal/Tray: Service with Terminated Lead
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: 12180559-1/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.