Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1496 (COMPONENT CONNECTOR END VIEWS (3 OF 4))INFLATABLE RESTRAINT SENSING AND DIAGNOSTIC MODULE (SDM)
2006 Pontiac G6 GTP, 2D Coupe, Standard
Inflatable Restraint Sensing and Diagnostic Module (SDM)
2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Inflatable Restraint Sensing and Diagnostic Module (SDM)
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Inflatable Restraint Sensing and Diagnostic Module (SDM)
| Pin | Wire | Circuit | Function |
|---|---|---|---|
| 1 | 0.35 RD/WH | 1340 | Battery Positive Voltage |
| 2 | 0.35 D-GN | 5060 | Low Speed GMLAN Serial Data |
| 3 | 0.35 PK | 5057 | Seat Position Sensor - Low Reference |
| 4 | 0.35 D-GN | 5016 | Seat Belt Switch - Left - Signal |
| 5 | - | - | Not Available |
| 6 | 0.35 OG | 1362 | Seat Belt Switch - Right - Signal |
| 7 | - | - | Not Available |
| 8 | 0.35 PK | 5020 | Roof Rail Module - Left - Low Control |
| 9 | 0.35 PU/WH | 5019 | Roof Rail Module - Left - High Control |
| 10 | 0.35 YE/BK | 5021 | Roof Rail Module - Right - High Control |
| 11 | 0.35 WH/BK | 5022 | Roof Rail Module - Right - Low Control |
| 12 | 0.35 PU | 3026 | I/P Module - Stage 2 - Low Control |
| 13 | 0.35 GY | 3027 | I/P Module - Stage 2 - High Control |
| 14 | 0.35 TN | 3021 | Steering Wheel Module - Stage 1 - High Control |
| 15 | 0.35 BN | 3020 | Steering Wheel Module - Stage 1 - Low Control |
| 16 | 0.35 PK | 3022 | Steering Wheel Module - Stage 2 - Low Control |
| 17 | 0.35 WH | 3023 | Steering Wheel Module - Stage 2 - High Control |
| 18 | 0.35 YE | 3025 | I/P Module - Stage 1 - High Control |
| 19 | 0.35 OG | 3024 | I/P Module - Stage 1 - Low Control |
| 20 | 0.35 L-GN | 2136 | Side Impact Module - Right Front - Low Control |
| 21 | 0.35 TN/WH | 2135 | Side Impact Module - Right Front - High Control |
| 22 | 0.35 BN | 2137 | Side Impact Module - Left Front - High Control |
| 23 | 0.35 YE/BK | 2138 | Side Impact Module - Left Front - Low Control |
| 24-30 | - | - | Not Available |
| 31 | 0.5 BK/WH | 1851 | Ground |
| 32 | 0.35 D-GN | 5060 | Low Speed GMLAN Serial Data |
| 33 | 0.35 PK | 1139 | Ignition 1 Voltage |
| 34-35 | - | - | Not Available |
| 36 | 0.35 GY | 5600 | Front End Sensor - Right - Low Reference |
| 37 | 0.35 D-GN | 1409 | Discriminating Sensor - Right - Signal |
| 38 | 0.35 YE | 354 | Discriminating Sensor - Signal |
| 39 | 0.35 TN/OG | 5045 | Front End Sensor - Signal |
| 40-45 | - | - | Not Available |
| 46 | 0.35 YE | 2131 | Side Impact Sensing Module - Left - Voltage |
| 47 | 0.35 WH | 2132 | Side Impact Sensing Module - Left - Signal |
| 48 | 0.35 D-GN | 2134 | Side Impact Sensing Module - Right - Signal |
| 49 | 0.35 TN | 2133 | Side Impact Sensing Module - Right - Voltage |
| 50-51 | - | - | Not Available |
| 52 | 0.5 L-GN | 2116 | Seat Belt Pretensioner - Right - High Control |
| 53 | 0.5 OG | 2117 | Seat Belt Pretensioner - Right - Low Control |
| 54-55 | - | - | Not Available |
| 56 | 0.5 TN/WH | 2118 | Seat Belt Pretensioner - Left - High Control |
| 57 | 0.5 OG/BK | 2119 | Seat Belt Pretensioner - Left - Low Control |
| 58-59 | - | - | Not Available |
| 60 | 0.35 PK | 5018 | Occupant Sensor - Serial Data |
Connector Part Information
|
Terminal Part Information
|
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.