SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1496 (COMPONENT CONNECTOR END VIEWS (3 OF 4))HVAC CONTROL MODULE X1 (C68)
2006 Pontiac G6 GTP, 2D Coupe, Standard

HVAC Control Module X1 (C68)

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION HVAC Control Module X1 (C68)
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: HVAC Control Module X1 (C68) Connector End View
GM850856Courtesy of GENERAL MOTORS CORP.
HVAC Control Module X1 (C68)

Pin Wire Circuit Function
1 0.35 TN/WH 1704 Low Reference
2 0.35 TN 552 Low Reference
3 0.35 TN/BK 2274 Recirculation Door Control
4 0.35 D-GN 1614 Recirculation Door Control
5 0.35 WH 119 Mode Door Control
6 0.35 TN 2273 Mode Door Control
7 0.35 YE 1791 Air Temperature Door Control B
8 0.35 D-BU 1199 Air Temperature Door Control B
9 0.35 GY/BK 754 Blower Motor Speed Request Signal
10 0.35 TN 808 Low Reference
11 0.35 GY 598 5-Volt Reference
12 0.35 GY 596 5-Volt Reference
13 0.35 GY 597 5-Volt Reference
14 0.35 PU 1838 Recirculation Door Position Signal
15 0.35 OG 708 Mode Door Position Signal
16 0.35 L-BU 733 Driver Air Temperature Door Position Signal
Connector Part Information 
  • OEM: 15429807
  • Service: See Catalog
  • Description: 16-Way F Micro 64 Series (GN)
Terminal Part Information 
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.