SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1493 (COMPONENT LOCATIONS AND ELECTRICAL CENTER IDENTIFICATION VIEWS)ELECTRICAL CENTER IDENTIFICATION VIEWSBODY CONTROL MODULE (BCM) X4
2006 Pontiac G6 GTP, 2D Coupe, Standard

Body Control Module (BCM) X4

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Body Control Module (BCM) X4
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Body Control Module (BCM) X4 Connector End View
GM697044Courtesy of GENERAL MOTORS CORP.
Body Control Module (BCM) X4

Pin Wire Circuit Function
A1-A2 - - Not Used
A3 0.35 PK/BK 5982 PRNDL B Signal
A4 - - Not Used
A5 0.35 PU/WH 5981 PRNDL A Signal
A6-A12 - - Not Used
B1 0.8 OG 228 Windshield Washer Pump Control
B2 0.35 GY 8 Instrument Panel Lamp Supply Voltage
B3 1 BN 41 Ignition 3 Voltage (C60)
B4-B5 - - Not Used
B6 0.35 BN 141 Ignition 3 Voltage
B7-B12 - - Not Used
C1 1 RD/WH 340 Battery Positive Voltage
C2 0.35 GY 8 Instrument Panel Lamp Supply Voltage
0.35 GY 8 Instrument Panel Lamp Supply Voltage (C60)
C3 0.35 BN/WH 1571 Traction Control Switch Signal
C4 1 OG 52 Blower Motor High Control (C60)
C5 - - Not Used
C6-C7 - - Not Available
C8 0.35 BN 4 Accessory Voltage
0.35 BN 4 Accessory Voltage
C9-C10 - - Not Used
C11 0.35 GY 8 Instrument Panel Lamp Supply Voltage
C12 0.35 YE 390 Instrument Panel Lamp Supply Voltage
0.35 YE 390 Instrument Panel Lamp Supply Voltage
D1 0.35 RD/WH 1040 Battery Positive Voltage
D2 - - Not Used
D3 0.35 PK 3 Ignition 1 Voltage
0.35 PK 3 Ignition 1 Voltage
D4 3 PU 65 Blower Motor Supply Voltage (C60)
D5 - - Not Used
D6-D7 - - Not Available
D8 0.8 YE 143 Accessory Voltage
D9 - - Not Used
D10 0.35 RD/WH 740 Battery Positive Voltage (JF4)
0.35 RD/WH 740 Battery Positive Voltage (JF4)
D11-D12 - - Not Used
E1 0.35 RD/WH 440 Battery Positive Voltage
0.35 RD/WH 440 Battery Positive Voltage
E2 3 RD/BK 442 Battery Positive Voltage (C68)
E3 1 D-BU 101 Blower Motor Supply Voltage (C60)
E4-E9 - - Not Used
E10 0.35 RD/WH 840 Battery Positive Voltage (UE1)
E11 - - Not Used
E12 0.35 BK 650 Ground
F1 0.35 RD/WH 1440 Battery Positive Voltage
0.35 RD/WH 1440 Battery Positive Voltage
F2 0.35 GY 8 Instrument Panel Lamp Supply Voltage
0.35 GY 8 Instrument Panel Lamp Supply Voltage (JF4)
F3 0.35 GY 8 Instrument Panel Lamp Supply Voltage
0.35 GY 8 Instrument Panel Lamp Supply Voltage (T96)
F4 0.35 PK 339 Ignition 1 Voltage
F5 - - Not Used
F6 0.35 PK 339 Ignition 1 Voltage (KB7)
F7-F8 - - Not Used
F9 0.35 PK 1039 Ignition 1 Voltage (HP7)
F10-F12 - - Not Used
Connector Part Information 
  • OEM: 15492668
  • Service: See Catalog
  • Description: 68-Way F Metri-Pack 280 Series, Flexlock (L-GY)
Terminal Part Information 
  • Pins: B1, B3, C1, C4, D8, E3
  • Terminal/Tray: 12110842/4
  • Core/Insulation Crimp: C/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: B2, B6, C2-C3, C5, C8, C11-C12, D1, D3, D10, E1, E10, E12, F1-F4, F6, F9
  • Terminal/Tray: 12110844/4
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: D4, E2
  • Terminal/Tray: 15324340/19
  • Core/Insulation Crimp: F/G
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.