SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1407 (LIGHTING SYSTEM)REPAIR INSTRUCTIONSFRONT SIDE MARKER LAMP BULB REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard

Front Side Marker Lamp Bulb Replacement

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Front Side Marker Lamp Bulb Replacement
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Side Marker Lamp Bulb
GM1993317Courtesy of GENERAL MOTORS COMPANY
Front Side Marker Lamp Bulb Replacement

Callout Component Name
Preliminary Procedure 
Remove the headlamp assembly. Refer to Headlamp Replacement .
1 Side Marker Lamp Bulb

Procedure

  1. Turn the side marker bulb socket counterclockwise and remove from the headlamp assembly.
  2. Pull the side marker bulb from the bulb socket.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.