Removal Procedure

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Removal Procedure
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Negative Cable & Ground Strap To Front Of Engine Bolt
    GM105211Courtesy of GENERAL MOTORS CORP.
  1. In order to remove the engine ground strap the battery negative cable is removed from the engine. Some of the vehicle information may get discarded when the battery negative cable is removed. Refer to Radio/Audio System Description and Operation in Entertainment for the information that may have to be reset. The battery negative cable does not require disconnection at the battery.
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  3. Remove the bolt retaining the battery negative cable and the ground strap to the engine.
  4. Fig 2: Removed Ground Strap And Bolt
    GM682041Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolt retaining the ground strap to the frame.
  6. Remove the ground strap.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.