Fastener Tightening Specifications

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Amplifier Radio Speaker Nut 10 N.m 89 lb in
Communication Interface Module Bolt 10 N.m 89 lb in
Communication Interface Module Bracket Bolt 6 N.m 53 lb in
Digital Radio Receiver Assembly Bolt 3 N.m 27 lb in
Mobile Telephone Digital Antenna Base Bolt 10 N.m 89 lb in
Mobile Telephone Microphone Bracket Screw 2 N.m 18 lb in
Radio Antenna Module Screw 3 N.m 27 lb in
Radio Front Side Door Speaker Bolt/screw 2.5 N.m 22 lb in
Radio Rear Speaker Screw 2 N.m 18 lb in
Radio Screw 2 N.m 18 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.