SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1220 (FIXED AND MOVEABLE WINDOWS SYSTEM)REPAIR INSTRUCTIONSFRONT SIDE DOOR WINDOW INNER SEALING STRIP REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard

Front Side Door Window Inner Sealing Strip Replacement

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Front Side Door Window Inner Sealing Strip Replacement
WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Side Door Window Inner Sealing Strip
GM1577804Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Front Door Window Inner Sealing Strip

Procedure

  1. Pull the inner sealing strip away from the inner window flange to remove.
  2. When installing the new sealing strip, start at the lower inside corner of the door frame.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.