SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1144 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)REPAIR INSTRUCTIONSDIGITAL RADIO ANTENNA CABLE REPLACEMENT
2006 Pontiac G6 GTP, 2D Coupe, Standard

Digital Radio Antenna Cable Replacement

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Digital Radio Antenna Cable Replacement
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Radio Antenna Cable
GM1791892Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedure

  1. Lower the headliner with wiring harness attached. Refer to Headlining Trim Panel Replacement (with DE1) or Headlining Trim Panel Replacement (without DE1) .
  2. Remove the rear window shelf panel. Refer to Rear Window Shelf Trim Panel Replacement .
1 Digital Radio Coaxial Cable
Procedure: 
Remove the coaxial cable from the front roof bow and the inner body side.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.