SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSPONTIAC2006G6 GTP, 2D COUPE, STANDARDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1069 (COMPONENT LOCATIONS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSRADIO X2
2006 Pontiac G6 GTP, 2D Coupe, Standard

Radio X2

2006 Pontiac G6 GTP, 2D Coupe, StandardSECTION Radio X2
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio X2 Connector End View
GM1664490Courtesy of GENERAL MOTORS CORP.
Radio X2

Pin Wire Circuit Function
1 0.35 BN/WH 367 Left Audio Signal (+) (U2K)
2 0.35 GY 388 Right Audio Signal (+) (U2K)
3 0.5 BK/YE 1574 Rear Audio Drain Wire
4 - - Not Used
5 0.5 BN/WH 599 Left Rear Low Level Audio Signal (+)
6 0.5 D-BU 546 Right Rear Low Level Audio Signal (+)
7 0.5 OG/BK 1406 Remote Playback Device Left Audio Signal (UE1)
8 0.35 PU 2334 Amplifier Control
9 0.35 TN/WH 372 Left Audio Signal (-) (U2K)
10 0.35 D-GN/WH 368 Right Audio Signal (-) (U2K)
11 0.5 BK/TN 1705 Drain Wire
12 - - Not Used
13 0.5 BN 1999 Left Rear Low Level Audio Signal (-)
14 0.5 TN/RD 1946 Right Rear Low Level Audio Signal (-)
15 0.35 L-BU 1405 Remote Playback Device Audio Common Signal (UE1)
16 - - Not Used
Connector Part Information 
  • OEM: 15491285
  • Service: See Catalog
  • Description: 16-Way F (BK)
Terminal Part Information 
  • Terminal/Tray: 7116-4618-02/14
  • Core/Insulation Crimp: P/P
  • Release Tool/Test Probe: J-38125-215/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.